Productivity
- Low heel makes cutting grade and
backdragging easier.
- Optional 5/8" x 8" bolt-on double bevelled cutting edge available.
Durability
- Side plates are formed ribbed for high compression resistance and increased
rigidity.
- Continuous weld inside of bucket shell provides greater strength and
longer life.
- Reversible double bevelled bolt-on high carbon steel leading cutting
edge.
- Heavy bottom scuff bars reinforce bucket bottom and protects from excessive
wear.
- The cutting edge wraps around the sidewalls of the bucket for added
strength and durability.
- Lower quick attach member extends the full width of the bucket. It
acts as a backbone to greatly increase stiffness and torsional rigidity of the bucket.
Efficiency
- Enclosed formed channel back reinforcements give superior bucket strength
and a clean fill and dump.
- Channel bottom gussets underneath the bottom plate for clean fill and
dump.
Safety
- The upper edge is u-shaped to provide greater stability in the top
section of the bucket.
- Standard safety step makes entering and leaving the loader easier and
safer.
| Construction/Industrial
Buckets |
| Model |
LC72 |
LC84 |
LC96 |
| A - Inside Width (inches) |
70.63" |
82.63" |
94.63" |
| B - Overall Width (inches) |
72" |
84" |
96" |
| C - Inside Depth (inches) |
40.88" |
40.88" |
40.88" |
| D - Overall Depth (inches) |
44.75" |
44.75" |
44.75" |
| E - Overall Height (inches) |
29.75" |
29.75" |
29.75" |
| Struck Capacity (cubic feet) |
28.5 cu.ft. |
33.3 cu.ft. |
38 cu.ft. |
| Heaped Capacity (cubic feet) |
34.1 cu.ft. |
40 cu.ft. |
45.4 cu.ft. |
| # of Holes in Bucket Edge |
8 |
9 |
10 |
| Approximate Weight (lbs.) |
590 lbs |
655 lbs. |
720 lbs. |
| Replaceable Bucket Edge |
Standard |
Standard |
Standard |
| Bucket Edge (inches) |
0.5" x 6" Rev. Cutting Edge |
| Wrapper and End Plates (inches) |
7" Ga. Reinforced |
| Side Edge (inches) |
0.5" x 6" |
| Optional Bolt-On Edge (inches) |
0.63" x 8" Rev. Cutting Edge |
Back to Large Capacity Buckets
