Productivity
- Cutting edge is factory drilled to accept optional bolt-on cutting
edge or tooth bar.
- Standard safety step makes entering and leaving the loader safer and
easier.
- Low heel makes cutting grade and backdragging easier.
- Buckets available with shanks welded solidly to the cutting blade
with replaceable crimp-on teeth.
- Optional 5/8" x 8" bolt-on double bevelled cutting edge
available for all buckets.
Durability
- Box beam section is integrated into the lower rear part of the bucket
for stiffness and torsional rigidity.
- Side cutting edges strengthens and protects bucket sides increasing
bucket life and performances.
- Continuous weld inside of bucket shell provides greater strength and
longer life.
- Heavy 1/2" bottom scuff bars (2 or 4 bars depending on bucket
model) reinforce bucket bottom and protects from excessive wear.
- The cutting edge wraps around the sidewalls of the bucket for added
strength.
- The quick attach mounting brackets are an extra reinforcing element
for the rear of the bucket.
- Optional tooth bar bolts across the width of the bucket for added
strength.
- Bevelled high carbon steel leading cutting edge.
Efficiency
- Round ripple formed radius backsheet gives superior bucket fill and
dump capabilities.
Safety
- The upper edge is u-shaped to provide greater stability in the top
section of the bucket.
- Low profile back gives better cutting edge visibility.
| Construction/Industrial
Buckets |
| Model |
CI62 |
CI72 |
CI84 |
| A - Inside Width (inches) |
60.63" |
70.63" |
82.63" |
| B - Overall Width (inches) |
62" |
72" |
84" |
| C - Inside Depth (inches) |
27.38" |
27.38" |
27.38" |
| D - Overall Depth (inches) |
31.5" |
31.5" |
31.5" |
| E - Overall Height (inches) |
20" |
20" |
20" |
| Rolled Back |
yes |
yes |
yes |
| Struck Capacity (cubic feet) |
12.1 cu.ft. |
14.1 cu.ft. |
16.4 cu.ft. |
| Heaped Capacity (cubic feet) |
14.7 cu.ft. |
17.1 cu.ft. |
19.9 cu.ft. |
| # of Holes in Bucket Edge |
7 |
8 |
9 |
| Approximate Weight (lbs.) |
365 lbs |
405 lbs. |
445 lbs. |
| Bucket Edge (inches) |
0.5" x 6" Cutting Edge |
| Wrapper and End Plates (inches) |
0.19" Ga. Reinforced |
| Side Edge (inches) |
0.25" x 2" |
| Optional Bolt-On Edge (inches) |
063" x 8" |
| Rev. Cutting Edge Optional Weld-On Teeth (# of teeth) |
7 |
8 |
9 |
| Optional Tooth Bar (# of teeth) |
7 |
8 |
9 |
Back to Construction/Industrial
Bucket
